Forum latest

How-To: nVidia Video Card BIOS volt-mod - Initial Voltage Options
Graphics Cards
Written by Samuknow   
Saturday, 16 September 2006 15:36
Article Index
How-To: nVidia Video Card BIOS volt-mod
Open NiBiTor
Select Device
Save Original BIOS
Initial Voltage Options
Voltage Table Editor
Edit Available Voltages
Select New Voltage
Save New BIOS
Flash New BIOS
Appendix: NiBiTor Supported BIOSes
All Pages

Initial Voltage Options

Now we are ready to mod our card's bios.  First let’s select the 'Voltages' tab and see what we have to work with.

When you select the 'Voltages' tab you will see this warning.  READ THIS.

Warning Dialog.

This is a good time to state this. You are attempting to modify your cards bios from stock. In doing so you could damage your card. It is a good chance you will void your warranty. Keeping it to a moderate increase you should be ok.

Neither AOA nor I are responsible for your card being damaged by you performing this mod

Click OK to continue.


You will see something similar to this. (Information will vary depending on your hardware)

Voltage Tab.

Don't Click Here Don't Click Here Either